This floor was originally specified to receive our InfinityFloor Matt Stone finish which requires 2-3mm of surface material removing. But upon inspection it was very evident that the floor had not been installed to a our supplied specification and needed around 10mm to be removed to erase the tamp marks and deep low spots; unfortunately this was not an option due to budget and finish floor height restrictions.
In end we had to make the best possible effort to try and save the floor.
We would always suggest that you follow our InfinityFloor specification to the letter and use a professional concrete installer to ensure you get the best finish possible.
During the grinding and polishing stages we used our PROhard densifier to increase the concrete strength and abrasion resistance, our colourable liquid grout PROgrout to fill aeration holes. Finally sealed with PROguard to provide a tough slip resistant finish.